Instrumented nanoindentation is used to measure elasticity and strength of bone at the level of individual osteons. Elastic modulus and nanoindenter hardness testing are performed by analyzing the contact stiffness as a continuous function of penetration depth.

Guidelines on geometries and recommended applications for different nanoindentation tips, including Berkovich, Vickers, Cube-Corner, Cone, and Sphere.

The NanoFlip indentation system was used to compress glass microspheres within an SEM chamber. At an elastic strain of 0.2%, the measured Young’s modulus fits exactly within the expected range for soda-lime glass. The results are enhanced by in situ SEM images which reveal both plastic yield and fracture.

The KLA Instruments T150 UTM tensile tester is used to quantify nanomechanical properties of silks from three different species of spider. The Continuous Dynamic Analysis (CDA) option allowed direct measurement of the silk stiffness at each point in the experiment in order to determine storage and loss modulus, as well as to measure complex moduli over a range of frequencies.

Many of the KLA Instruments Nano Indenter^® systems include the capability to measure electromechanical properties. This paper discusses use of the I-V Option for studying Pyrolytic Carbon (PyC).

A KLA nanoindenter is used with the NanoBlitz 3D option to perform nanoindentation hardness testing on Scalmalloy, a commercial aluminum alloy specifically designed for laser-powder-bed additive manufacturing. NanoBlitz 3D maps of the Scalmalloy cross-section clearly illustrate the layered 3D metal printing process, with a bimodal hardness distribution and a Gaussian modulus distribution.

Using the test method ‘Complex Shear Modulus of Biomaterials’, a KLA nanoindenter performs nanoindentation testing on edible gelatin. Theory, sample preparation and measurement technique are discussed.

The nanomechanical and topographic properties of UVC-exposed N95 respirator filtration fibers are investigated using a KLA Nano Indenter G200X with CSM and survey scanning options, with topography characterized and measured by a Zeta™-20 optical profiler. The G200X NanoVision scanning image coupled with nanoindentation placement capability allows Young's modulus and nanoindentation hardness testing on individual fibers.

A KLA Nano Indenter^® G200 was used for material characterization of both bare M42 steel and its TiN coating. Nanoindentation testing included ISO 14577 semi-static tests and Continuous Stiffness Measurement (CSM) tests.

The iMicro nanoindenter was used to generate stress-strain curves for commercially pure titanium using the standard iMicro test method "Flat Punch on Metals for Stress-Strain." The flat-punch geometry is superior to the more commonly used sphere, because both the contact area and the volume of tested material remain constant throughout the nanoindentation test.

The KLA InSEM^® HT high temperature nanoindenter was used for material characterization of Physical Vapor Deposition (PVD) ZrN coatings on steel. NanoBlitz 3D was used to compare maps of hard coating modulus and hardness at both 400°C and 660°C.

A KLA Nano Indenter^® system is used with the ProbeDMA™ nanoindentation technique to analyze the silicone gel coatings of two automotive MEMS-based pressure sensors. ProbeDMA takes advantage of Continuous Stiffness Measurement (CSM) to provide quantitative results for both DMA (storage) modulus and contact stiffness for the two sensors.

The Nano Indenter^® G200 is used to study the extent of layer damage from charged iron particles and protons into the bulk of irradiated HCM12A steel by measuring indentation hardness as a function of penetration depth.

A KLA Nano Indenter^® was used with NanoBlitz 3D high speed mapping for elastic modulus and nanohardness testing of the bond coat, top coat and interface regions of as-coated and thermally-cycled thermal barrier coatings (TBCs). Excellent correlation was found between the microstructure and the local nanomechanical properties at the micrometer length scale, even at the interface between the various layers of TBC and in the porous top coat.

A KLA-developed technique was used for measuring the storage and loss modulus of artificial tissue samples using dynamic nanoindentation on a KLA Nano Indenter^® G200. Tests were performed using the Continuous Stiffness Measurement (CSM) option, which allows for frequency-specific, dynamic nanoindentation, which provides better spatial resolution for material characterization than traditional bulk DMA analysis.

Ten different materials are tested with the KLA iNano^® nanoindenter in accordance with ISO 14577-1, including polymers, metals, glasses and single crystals. The same test method measuring Young's modulus values also automatically determines instrumented nanoindentation hardness and the converted Vickers Hardness Number (VHN).

The KLA iMicro nanoindenter is used to measure the near-surface indentation hardness of Fe₁₄Cr. Both the irradiated and control Fe₁₄Cr are analyzed using the iMicro nanoindentation test method “Advanced Dynamic E and H" to generate continuous measurement of both Young’s modulus and Vickers hardness.

A Nano Indenter^® G200X system was used to perform impact nanoindentation testing on aluminum, iron, stainless steel, and commercial purity magnesium. Hardness testing as a function of strain rate was compared for these materials using the ISO 14577 test method and Constant Load and Hold (CLH) testing.

The Student’s t-test is used in an uncommon way to predict the number of observations, N, which must be made in order to be sensitive to a given difference at a given confidence level. With respect to nanoindentation, this analysis illuminates the benefits of the ultra-fast testing afforded by the Express Test option for the KLA Nano Indenter^® G200 to dramatically improve the sensitivity to significant difference.

A KLA nanoindenter utilizing the hot stage, the Continuous Stiffness Measurement (CSM) option and the “Dynamic CSR for Thin Films” test method was used for measuring Young’s modulus and indentation hardness of optical coatings on fused silica substrates. Results were compared for two optical coatings at 22°C, 150°C and 300°C.

The Nano Indenter^® G200 is used with the Express Test and the laser-heated tip and stage options for elastic modulus and indentation hardness testing of Ordinary Portland Cement (OPC) paste at temperatures from 20°C to 250°C. NanoVision was also used to generate surface topography measurements.

The KLA Nano Indenter^® G200 and iMicro nanoindenter were used to provide a large range of loads required for testing the fracture toughness (K_c) of NbC, sapphire, VC, TiC, ZrC, WC, borosilicate glass, and Plexiglass (PMMA). The Stiffness Mapping technique on the G200 NanoVision Stage enabled the capture of the full length of fine cracks for the most accurate measurements of K_c.

The KLA T150 UTM nanotensile tester is used to characterize the failure mechanisms in flexible electronic structures under bending. A thin film of brittle ceramic Indium Tin Oxide (ITO) sputter coated on a Polyethylene Terephthalate (PET) substrate is analyzed to generate nanoindentation hardness, Young's modulus, flexural stress/strain curves and dynamic stiffness/strain curves.

The interface adhesion energy of low k films is measured using the ISO 14577 standard nanoindentation method with a decremental loading factor. Analysis of the load-displacement curves determined the load at crack initiation/delamination at the film/substrate interface, and the energy dissipated during nanoindentation near the critical load.

A KLA nanoindenter is used to perform local dynamic mechanical analysis (DMA) testing on SBR, mounted inside a cold chamber. The ProbeDMA™ nanoindentation testing method measures frequency-specific viscoelastic material properties, and is used here to compare the storage modulus of SBR as a function of temperature and frequency.

This paper, co-authored by Warren C. Oliver and originally published in Materials and Design, discusses high speed nanoindentation mapping as applied to thermal barrier coatings (TBCs). Extensive nanoindentation tests are performed using NanoBlitz 3D to spatially map the indentation hardness and elastic modulus of the bond coat, top coat and bond coat-top coat interface regions of as-coated and thermally cycled TBCs. The resulting spatial property maps are compared with the corresponding microstructures to establish correlations.

This paper, co-authored by Warren C. Oliver and originally published in Materials and Design, discusses high speed nanoindentation mapping using NanoBlitz 3D for local nanomechanical testing of multi-phase alloys and small volumes of materials with high throughput. To determine the minimum spacing between indents required to prevent interactions from neighboring indents, extensive nanoindentation experiments and finite element simulations are performed.

A Nano Indenter^® G200 system equipped for ultra-low force indentation with Dynamic Contact Module (DCM), NanoVision, and Continuous Stiffness Measurement (CSM) options was used for material characterization of a nanoporous low k film on a silicon substrate. Dynamic imaging and stiffness mapping was used to measure crack length to determine both the fracture toughness and failure “fingerprints” of the low k films.

A Nano Indenter^® G200 is used to determine the scratch and wear properties of ten spin-coated low k films on silicon substrates. A ramp-load scratch test is performed, with a single line scan of the coating surface collected before and after the scratch test to determine residual deformation. The NanoVision stage is used to provide high resolution positioning capability for the nanoindentation testing.

The brittle-to-ductile transition (BDT) of single-crystal silicon (SC-Si) is studied using the Nano Indenter^® G200 with the laser heating option. The plasticity transition and creep behavior are characterized by comparing the nanoindentation loading-unloading curves for temperatures up to 500°C.

The Nano Indenter^® G200 is used with the Dynamic Contact Module (DCM) transducer and NanoVision options for nanomechanical testing of both dry and hydrated endothelial cells. High resolution NanoVision images were also generated to compare cells before and after hydration.

NanoVision is used with the KLA G200 and G200X nanoindenters to generate high resolution nanoindentation images in order to examine residual impressions and quantify material response phenomena such as pile-up, deformed volume and fracture toughness.

The Nano Indenter^® G200 can be used with a laser heated tip and high temperature stage for nanomechanical testing and material characterization at precisely controlled temperatures. Temperature-dependent data are shown for a number of sample materials.

Express Test is a method of rapid nanomechanical testing used with a KLA nanoindenter to generate histograms and 3D maps of nanomechanical properties, such as Young's modulus and nanohardness, with negligible thermal drift.

This application note discusses the Continuous Stiffness Measurement (CSM) nanoindentation option, used for applications that must take into account dynamic effects, such as strain rate and frequency. The CSM option for material characterization offers a means of separating the in-phase and out-of-phase components of the load-displacement history.

Nanoindentation creep measurements of Al1100 are made with the KLA InSEM^® HT nanoindenter, which allows for independent tip and sample heating to maintain isothermal testing conditions. Results show that nanoindentation measurements can yield uniaxial creep properties that are in excellent agreement with traditional creep testing.

Dynamic instrumented indentation was used to measure the complex shear modulus of soft biological tissue under physiological conditions. Continuous Stiffness Method (CSM) nanoindentation was used with the hot stage option to compare the complex shear modulus and confirm the anisotropic nature of muscle tissue.

Instrumented Indentation Testing (IIT) or Depth-Sensing Indentation (DSI) has become the technique of choice for nanomechanical testing and material characterization. This paper discusses the Oliver-Pharr test method, theory and analysis for extraction of Young's modulus, hardness, complex modulus, stress exponent for creep, and fracture toughness.

A KLA nanoindenter using the Continuous Stiffness Measurement (CSM) option to measure the Young's modulus and nanoindentation hardness of three sol-gel coatings. Scratch tests were also performed to evaluate adhesion of the coatings. In the case of adhesive failure, NanoSuite Explorer was used to identify the critical load at failure.

Probe based Dynamic Mechanical Analysis (ProbeDMA™) nanomechanical testing was performed on cross sections of a rubber tire using the Continuous Stiffness Measurement (CSM) technique. The local storage and loss moduli were compared for different material structures along the cross sections.

Instrumented Indentation Testing (IIT) is used to measure strain rate sensitivity (SRS) of thin nickel and copper films on silicon. The Continuous Stiffness Measurement (CSM) nanoindentation option was also used in order to measure indentation hardness and elastic modulus as a continuous function of penetration depth.

Nanoindentation hardness testing was used to analyze ultra-thin gold films before and after vacuum annealing, deposited on two different substrates. NanoBlitz 3D and Express Test results showed a significant decrease in indentation hardness of the gold metal films.

A lamellar eutectic alloy was directionally solidified to achieve a microstructure of chromium silicide Cr₃Si and a chromium-rich solid. A Nano Indenter^® G200 equipped with NanoVision, the Dynamic Contact Module (DCM) and the Continuous Stiffness Measurement (CSM) option to generate nanoindentation surface maps of indentation hardness and Young's modulus of the multiphase material.

The Continuous Dynamic Analysis (CDA) option on the T150 UTM nanomechanical tester provides a simple means of determining dynamic mechanical properties as a function of strain by superimposing a high frequency oscillatory force onto the nominal loading force. This option sheet discusses features and benefits of the technique, as well as material characterization applications.

The KLA T150 UTM nanotensile tester is used for dynamic characterization of Young’s modulus as a continuous function of strain. The T150 UTM is used as a tensile tester for material characterization of basalt glass fibers, tungsten fibers and polypropylene fibers, with the fibers extended to the point of failure.